Design guide for circular hollow section (chs) joints under predominantly static loading

[M@hdi42]

---

DESIGN GUIDE FOR CIRCULAR HOLLOW SECTION (CHS) JOINTS UNDER PREDOMINANTLY STATIC LOADING
http://forum.civilea.com/Thread-desi...56108#pid56108
Author: J. Wardenier, Y. Kurobane, J.A. Packer, G.J. van der Vegte and X.-L. Zhao | Size: 5.97 MB | Format: PDF | Publisher: CIDECT | Year: 2008 | pages: 142 | ISBN: 9783938817032

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

The objective of this 2nd edition of the Design Guide No. 1 for circular hollow section (CHS) joints under predominantly static loading is to present the most up-to-date information to designers, teachers and researchers. Since the first publication of this Design Guide in 1991 additional research results became available and, based on these and additional analyses, the design strength formulae in the recommendations of the International Institute of Welding (IIW) have recently been modified. These recommendations are the basis for the new ISO standard in this field and also for this Design Guide. However, these new IIW recommendations have not yet been implemented in the various national and international codes, which are still based on the previous 1989 edition of the IIW rules. Therefore, the recommendations in the previous version of (this Design Guide and) the IIW 1989 rules, which are moreover incorporated in Eurocode 3, are also given. Further, the new IIW formulae, the previous IIW (1989) recommended formulae and those in the API (2007) are compared with each other. Under the general series heading “Construction with Hollow Steel Sections”, CIDECT has published the following nine Design Guides, all of which are available in English, French, German and Spanish:
1. Design guide for circular hollow section (CHS) joints under predominantly static loading (1st edition 1991, 2nd edition 2008)
2. Structural stability of hollow sections (1992, reprinted 1996)
3. Design guide for rectangular hollow section (RHS) joints under predominantly static loading (1st edition 1992, 2nd edition 2009)
4. Design guide for structural hollow section columns exposed to fire (1995, reprinted 1996)
5. Design guide for concrete filled hollow section columns under static and seismic loading (1995)
6. Design guide for structural hollow sections in mechanical applications (1995)
7. Design guide for fabrication, assembly and erection of hollow section structures (1998)
8. Design guide for circular and rectangular hollow section welded joints under fatigue loading (2000)
9. Design guide for structural hollow section column connections (2004)
Further, the following books have been published:
“Tubular Structures in Architecture” by Prof. Mick Eekhout (1996) and “Hollow Sections in Structural Applications” by Prof. Jaap Wardenier (2002). CIDECT wishes to express its sincere thanks to the internationally well-known authors of this Design Guide, Prof. Jaap Wardenier of Delft University of Technology, The Netherlands and National University of Singapore, Singapore, the late Prof. Yoshiaki Kurobane of Kumamoto University, Japan, Prof. Jeffrey Packer of University of Toronto, Canada, Dr. Addie van der Vegte of Delft University of Technology, The Netherlands and Prof. Xiao-Ling Zhao of Monash University, Australia for their willingness to write the 2nd edition of this Design Guide.
http://www.filesonic.com/file/129942...G1_2nd_edt.pdf
http://ifile.it/1ozagnh
http://www.4shared.com/document/QBpA...1_2nd_edt.html

[M@hdi42]

---

AISC 360-10 Specification for Structural Steel Buildings - draft
http://forum.civilea.com/Thread-ansi...-specification
Size: 5.35 MB | Format: PDF | Year: 2009 | pages: 315

جهت مشاهده ی تصویر در ابعاد واقعی 700x906 پیکسل اینجا کلیک کنید.

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

http://ifile.it/p46mi5t

http://www.megaupload.com/?d=RPGVXTB8

http://www.filesonic.com/file/189450..._Buildings.pdf

http://www.4shared.com/document/aE_a...r_Structu.html