دانلود نرم افزارهای محاسباتی تحت اکسل

[M@hdi42]

---

Concrete: Corbel Design
Corbel Design: ACI

به نقل از : http://forum.civilea.com/showthread.php?tid=2514
http://www.4shared.com/dir/18608588/...el_Design.html

[M@hdi42]

---

Foundation: Deterministic Shallow Foundation Design using SPT Data
به نقل از : http://forum.civilea.com/showthread.php?tid=2540
More information (formats. PDF):
a. Reliability of shallow foundation design using the Standard Penetration Test
b. Table 1 summarizes a total of 27 sources of uncertainty and bias, classified in five categories. This classification aims to assist the practicing engineer in taking the necessary measures to minimize the uncertainties in the performance of the test:
Category A includes sources that depend on the type of soil, with emphasis in sources related to granular materials since the use of the SPT is generally not recommended for cohesive soils.
Category B lists sources of uncertainty due to the presence of water.
Category C includes reducible sources re-lated to the equipment and its maintenance.
Category D includes sources that are reducible if the test procedure is performed care-fully.
Category E lists irreducible sources in the investigation procedure.

http://www.4shared.com/dir/18647250/...SPT__DATA.html
http://www.geoengineer.org/files/ISC-zekkosetal2004.pdf
http://www.geoengineer.org/files/ISC2004-table.pdf

[M@hdi42]

---

Bridge Deck Slab & Parapet Design
به نقل از : http://forum.civilea.com/showthread.php?tid=19595
Bridge Deck Slab & Parapet Design
AASHTO Standard, LFD
Unit: ton, m, ksc

[M@hdi42]

---

Design of End Block Reinforcement of Post-Tensioned Girder
به نقل از : http://forum.civilea.com/showthread.php?tid=19592
Design of End Block Reinforcement of Post-Tensioned Girder
Unit: ton, m, ksc
End block reinforcement was designed by working stresses method, any code where they specify allowable tensile stress of steel, allowable compressive stress of concrete can be applied.

[M@hdi42]

---

Bridge Expansion Joint Design
به نقل از : http://forum.civilea.com/showthread.php?tid=19590
Bridge Expansion Joint Design
BS 8110 Creep Strain

[M@hdi42]

---

Bridge Abutment Design (Include Seismic Load)
به نقل از : http://forum.civilea.com/showthread.php?tid=19589
Bridge Abutment Design (Include Seismic Load)
Unit: ton, m, ksc

[M@hdi42]

---

Concrete: STUDRAIL v 5.0 - Shear Reinforcing Design
به نقل از : http://forum.civilea.com/showthread.php?tid=2693
Concrete: STUDRAIL v 5.0 - Shear Reinforcing Design
Base on AS 3600 (Australian Code)
http://www.4shared.com/dir/18869751/...DRAIL_V50.html

[mmc22]

---

منبع:
http://www.civilstars.com/Thread-%D8...%B3-aci-318-05
برنامه ای تحت اکسل برای محاسبه طول وصله و محل قطع آرماتور تیر ها بر اساس aci 318-05
لینک دانلود:
http://www.box.net/shared/sy2fmbl6th
پسورد:
www.civilstars.com

من این فایل رو از سایتی که معرفی کردین نمیتونم دانلود کنم میشه لینکشو جای دیگه ای قرار بدین ... مممنون