توجه ! این یک نسخه آرشیو شده میباشد و در این حالت شما عکسی را مشاهده نمیکنید برای مشاهده کامل متن و عکسها بر روی لینک مقابل کلیک کنید : مبدل های حرارتی(Heat Exchangers)
پارمیدا72
5th July 2010, 11:52 PM
Heat Exchanger Design Handbook 2002 (HEDH 2002)
The Most Essential Standard in the World
Now in Four Hardbound Volumes
http://www.iran-eng.com/ii/.gifhttp://www.begellhouse.com/i/i.rt.gifhttp://www.begellhouse.com/i/i.r.gifhttp://www.begellhouse.com/i/i.lb.gifhttp://www.begellhouse.com/i/i.rb.gifhttp://www.begellhouse.com/i/1.gif
Geoffrey Hewitt
Imperial College London
This new 2002 Edition of the HEAT EXCHANGER DESIGN HANDBOOK marks the 20th anniversary of the completion of the first edition of the Handbook. Since then, the HEDH has become the standard reference source for both industrial and academic circles for information and guide for the thermal, fluid and mechanical design and maintenance of heat exchangers and on the associated heat transfer and fluid flow phenomena as well as an indispensable prime source of thermophysical property data.
Under the editorship of Professor Geoffrey F. Hewitt, the HEAT EXCHANGER DESIGN HANDBOOK continues to serve the community as a tool in the heat exchanger design practice and teaching.
Greatly expanded, revised and replaced contents of the HEDH represent the progress in the field over the last quarter of a century. This steady growth, achieved through updating is being accomplished through the continuous quarterly publication of the HEAT EXCHANGER DESIGN UPDATE and has become the standard tool in the art and science of heat exchanger design.
HEDH 2002 consists of five parts published in four volumes
VOLUME I
PART 1. HEAT EXCHANGER THEORY
This part describes the heat exchanger types and defines quantitative relationships for solving of the equations for heat balance and temperature differences. It provides a unique collection of charts for mean temperature differences in industrial heat exchanger configurations. New methods and computer applications have been added for, among others, exchangers with three tube-side passes and applications for spiral and bayonet-type equipment.
Also, newly developed methods for baffle design have been added and a new Section p rovided for Exergy Analysis and Entropy Generation to supplement the earlier presentation of Pinch Analysis. All three technologies stress the importance of the thermodynamic overview of the heat transfer process.
VOLUME II
PART 2. FLUID MECHANICS AND HEAT TRANSFER
This essential part of the 2002 Handbook provides the basic information on topics such as single and two phase fluid flow, convective heat transfer, radiative heat transfer, condensation, boiling, etc. The present edition has been extensively revised and extended. CFD techniques are covered, as is turbulence modeling. Both liquid and gas fluidized bed sections have been expanded, as has the Section dealing with non-Newtonian flow. Multiphase flow has been revised and updated. Pressure drop prediction methods have been brought to current practice levels.
Single-phase heat transfer in ducts and cross-flow is one of the keystone areas for heat exchanger design. It has been rearranged to include smooth straight tubes, annuli, and tube banks and new dimensionless correlations. Packed beds have been extensively covered.
A new major section on porous media is presented. Multiphase heat transfer is thoroughly covered. Enhancement has been included. Industrial boiling equipment and design are presented in depth and new equations and systems are discussed. Deterioration of heat transfer coefficients in multicomponent systems is analyzed. Dynamically and statically stable foams are covered in new sections, with prediction of low-energy consumption
VOLUME III
PART 3. THERMAL AND HYDRAULIC DESIGN OF HEAT EXCHANGERS
General heat exchanger design deals with the full gamut of heat exchanger types ranging from shell-and-tube exchangers to cooling towers, from reboilers to condensers, from agitated vessels to furnaces, New sections describe the selection, rating and design are stressed with computer algorithms for exchangers included. New and modern flow stream method is described as a replacement for the Bell-Delaware system for use with commercial computer codes. New sections on reboilers and falling-film evaporators are presented as are new upgrades of cooling towers. A totally new and comprehensive section on fouling has been printed with emphasis on the industrial applications.
PART 4. MECHANICAL DESIGN OF HEAT EXCHANGERS
Basic mechanical principles, materials of construction, design codes, testing and inspection, costing, flanges, tube-to-tube attachments, etc. are treated in this section. Major revisions have been included ion the present edition of HEDH 2002. A new Section of proposed European standard for unfired pressure vessels has been added, introducing new ISO work. Software for design is discussed together with various new information on new titanium metal and titanium alloys. Heat exchanger costing on the basis of per unit heat transfer surface is presented. Comparisons between heat exchanger types are included. Numerical examples are cited. Gasket materials are classified and analyzed. External insulation and protection are discussed.
VOLUME IV
PART 5. PHYSICAL PROPERTIES
The availability of physical property data on the materials of construction of heat exchangers and on the fluids passing through them has always been one of the most troublesome aspects of the equipment design process. This self-standing part of the HEAT EXCHANGER DESIGN HANDBOOK 2002 addresses this problem by providing information and, more importantly, wide-ranging tabular data on a great variety of substances and properties.
Part 5 gives data on all relevant vapor and liquid properties along the saturation curve. Also, data for subcooled liquids and superheated gases are given in numerous tables.
Data on density, specific heat capacity, thermal conductivity and dynamic viscosity have been greatly expanded to include latent heat of vaporization, saturated vapor pressure, Prandtl number, surface tension and thermal expansion coefficient. Also, new data on the physical properties of superheated gases at atmospheric pressure are tabulated including a myriad of physical and thermal properties. This volume is truly an indispensable tool for heat exchanger designers.
Four Volume Set:
HEAT EXCHANGER DESIGN HGNDBOOK 2002.
3840 pages. ISBN 1-56700-181-5 $1449.00
Individual Volumes:
Volume 1:
Part 1. HEAT EXCHANGER THEORY.
320 pages. ISBN 1-56700-182-3 $325.00
Volume 2:
Part 2. FLUID MECHANICS AND HEAT TRANSFER.
1250 pages. ISBN 1-56700-183-1 $450.00
Volume 3:
Part 3. THERMAL AND HYDRAULIC DESIGN OF HEAT EXCHANGERS.
Part 4. MECHANICAL DESIGN OF HEAT EXCHANGERS.
1450 pages. ISBN 1-56700-184-X $550.00
Volume 4:
Part 5. PHYSICAL PROPERTIES.
850 pages. ISBN 1-56700-185-8 $395.00
ISBN 1-56700-181-5
پادشاه ایرانی
پارمیدا72
5th July 2010, 11:54 PM
اینم اطلاعات با ارزشی از data sheet های یه لوله پوسته
Standard Shell & Tube
Basco Type 500 Shell & Tube Heat Exchangers
The Basco Type 500 remains the industry standard in ultimate value and long-term reliability. This proven fixed tubesheet shell & tube heat exchanger offers the cost effectiveness that comes with having a highly standard design, while easily providing for various options to meet specific customer requirements. http://www.apiheattransfer.com/Images/Products/HeatExchangers/ShellAndTube/500_pair%20283x189.jpg
Sizes:3" to 12" diameter; 14" to 120" length Shells:Carbon Steel or 304 Stainless Steel Tubes:1/4", 3/8" or 5/8" diameter tubes available in Copper, Admiralty, 90/10 CuNi, or 304 S/S.
Straight tube or U-Tube configurations Baffles:Precision punched Carbon Steel, Brass, or 304 S/S Heads:Cast heads available in iron, 304 S/S, or bronze; Fabricated heads available in Steel, 304 S/S, or 90/10 CuNi. Flow:Available in 1-pass, 2-pass, and 4-pass designs Codes:Commercial Standard (non-code)
ASME
TEMA-C Basco Type 500 heat exchangers are manufactured in our ISO 9001 certified Buffalo, NY facility using Demand Flow Technology (DFT) manufacturing processes. DFT products are made "on-demand" from components and in-line support machining centers. API Heat Transfer has invested heavily in DFT and embraces the superior quality, improved workflow and cost controls inherent in DFT manufacturing. Typical applications for Type 500's include:
Compressor Systems
Lube Oil Consoles
Hydraulic Systems
Stationary Engines
Turbine
Marine Applications
Paint Systems
Air Dryers
Vapor Recovery Systems
پادشاه ایرانی
پارمیدا72
5th July 2010, 11:59 PM
text book ِ مبدل های گرمایی ویرایش 3
A Heat Transfer Textbook, 3rd edition
Copyright (c) 2000-2006 by John H. Lienhard IV and John H. Lienhard V. All rights reserved.
این فایل در حقیقت در مورد سیستم های گرمایی سرمایی از جمله مبدل های گرمایی هست.
یه خورده حجمش زیاد هست ولی میشه یه جورایی با صبر و حوصله دانلودش کرد.
http://web.mit.edu/lienhard/www/ahttv124.pdf
و در ادامه لیستی از کتابهای معروف دنیا *در مورد طراحی تجهیزات صنایع مادر نفت و اقتصاد پویای اون* را در اختیارتون قرار می دهم.
امیدوارم که به دردتون بخوره.
Background Reference Materials
The undergraduate textbooks used in chemical engineering courses in chemistry, transport phenomena, thermodynamics, reaction kinetics, and applied mathematics are set out below.
Silbey, Robert J., Robert A. Alberty, and Moungi G. Bawendi. Physical Chemistry. 4th ed. New York, NY: John Wiley & Sons, Inc., 2004. ISBN: 047121504X.
Smith, J. M., H. C. Van Ness, and Michael Abbott. Introduction to Chemical Engineering Thermodynamics. 7th ed. New York, NY: McGraw-Hill Science/Engineering/Math, 2004. ISBN: 0073104450.
Denn, M. M. Process Fluid Mechanics. Englewood Cliffs, NJ: Prentice-Hall, 1980. ISBN: 0137231636.
Incropera, Frank P., and David P. DeWitt. Fundamentals of Heat and Mass Transfer. 5th ed. New York, NY: John Wiley & Sons, 2001. ISBN: 0471386502. (Including software tools, users' guides and associated CD.)
Seader, J. D., and Ernest J. Henley. Separation Process Principles. New York, NY: Wiley, 1998. ISBN: 0471586269.
Fogler, Scott H. Elements of Chemical Reaction Engineering. 3rd ed. Upper Saddle River, NJ: Prentice Hall PTR, 1999. ISBN: 0139737855. (Including associated CD.)
Process Design Text Books
References more closely related to process design are set out below.
Aerstin, F., and G. Street. Applied Chemical Process Design. New York, NY: Plenum Press, 1978. ISBN: 0306310880.
Branan, C. Rules of Thumb for Chemcial Engineers, A Manual of Quick, Accurate Solutions to Everyday Process Engineering Problems. 2nd ed. Houston, TX: Gulf Publishing Company, 1988. ISBN: 0884157881.
Biegler, L., I. E. Grossmann, and A. W. Westerberg. Systematic Methods of Chemical Process Design. Upper Saddle River, NJ: Prentice Hall PTR, 1997. ISBN: 0134924223.
Center for Chemical Process Safety (CCPS) and the American Institute of Chemical Engineers (AIChE). Guidelines for Chemical Reactivity Evaluation and Application to Process Design. New York, NY: Center for Chemical Process Safety of the American Institute of Chemical Engineers, 1995. ISBN: 0816904790.
Center for Chemical Process Safety. Guidelines for Design Solutions for Process Equipment Failures. Book and disk ed. New York, NY: Center for Chemical Process Safety of the American Institute of Chemical Engineers, 1998. ISBN: 081690684X. (Center for Chemical Process Safety "Guidelines" Series)
Coker, A. K. Applied Process Design for Chemical and Petrochemical Plants. Vol. 1. 4th ed. Gulf Professional Publishing, 2006. ISBN: 075067766X.
Douglas, J. Conceptual Design of Chemical Processes. New York, NY: McGraw-Hill Science/Engineering/Math, 1988. ISBN: 0070177627.
Duncan, T. M., and J. A. Reimer. Chemical Engineering Design and Analysis: An Introduction. New York, NY: Cambridge University Press, 1988. ISBN: 0521639565.
Erwin, D. L. Industrial Chemical Process Design. New York, NY: McGraw-Hill Companies, 2002. ISBN: 0071376208.
Koolen, J. L. A. Design of Simple and Robust Process Plants. Chichester, UK: Wiley-VCH, 2001. ISBN: 3527297847.
Ludwig, E. E. Applied Process Design for Chemical and Petrochemical Plants. Vol. 1. 3rd ed. Houston, TX: Gulf Professional Publishing, 1995. ISBN: 0884150259.
Murphy, R. M. Introduction to Chemical Processes: Principles, Analysis, Synthesis. Dubuque, IA: McGraw Hill, 2007. ISBN: 0072849606.
Ray, M. S., and M. G. Sneesby. Chemical Engineering Design Project: A Case Study Approach. 2nd ed. Amsterdam, The Netherlands: Gordon and Breach Science Publishers, 1998. ISBN: 9056991361.
Rudd, D. F., G. J. Powers, and J. J. Siirola. Process Synthesis. Englewood Cliffs, NJ: Prentice Hall, Inc., 1973. ISBN: 0137233531.
Seider, W. D., J. D. Seader, and D. R. Lewin. Product and Process Design Principles: Synthesis, Analysis, and Evaluation. 2nd ed. New York, NY: Wiley, 2004. ISBN: 0471216631.
Smith, R. Chemical Process: Design and Integration. 2nd ed. Hoboken, NJ: John Wiley & Sons, 2005. ISBN: 0471486817.
Turton, R., R. C. Bailie, W. B. Whiting, and J. A. Shaeiwitz. Analysis, Synthesis, and Design of Chemical Processes. Upper Saddle River, NJ: Prentice Hall PTR, 1998. ISBN: 0135705657. (Prentice Hall International Series in the Physical and Chemical Engineering Sciences)
Woods, D. R. Process Design and Engineering Practice. Englewood Cliffs, NJ: Prentice Hall PTR, 1995. ISBN: 0138057559.
Product Design
Cooper, R. G. Winning at New Products: Accelerating the Process from Idea to Launch. 2nd ed. Reading, MA: Perseus Books Addison-Wesley, 1993. ISBN: 0201563819.
Cussler, E. L., G. D. Moggridge, and A. Varma. Chemical Product Design. New York, NY: Cambridge University Press, 2001. ISBN: 0521796334.
Magrab, E. B. Integrated Product and Process Design and Development: The Product Realization Process. Boca Raton, FL: CRC Press, 1997. ISBN: 0849384834.
McConnell, S. Rapid Development. Redmond, WA: Microsoft Press, 1996. ISBN: 1556159005.
Ulrich, K. T., and S. D. Eppinger. Product Design and Development. 3rd ed. Boston, MA: McGraw-Hill/Irwin, 2004. ISBN: 0072471468.
Process and Engineering Economics
Brennan, D. Process Industry Economics: An International Perspective. Rugby, UK: Institution of Chemical Engineers, 1998. ISBN: 0852953917.
DeGarmo, E. P., W. G. Sullivan, J. A. Bontadelli, and E. M. Wicks. Engineering Economy. 10th ed. Upper Saddle River, NJ: Prentice Hall, 1997. ISBN: 0133831935.
Park, C. S. Fundamentals of Engineering Economics. Upper Saddle River, NJ: Pearson/Prentice Hall, 2004. ISBN: 0130307912.
Peters, M. S., K. D. Timmerhaus, R. E. West, and M. Peters. Plant Design and Economics for Chemical Engineers. 5th ed. New York, NY: McGraw-Hill Science/Engineering/Math, 2003. ISBN: 0072392665.
Sullivan, W. G., E. M. Wicks, and J. Luxhoj. Engineering Economy. 12th ed. Upper Saddle River, NJ: Prentice Hall, 2003. ISBN: 0130673382.
Ulrich, G. D., and P. T. Vasudevan. Chemical Engineering Process Design and Economics: A Practical Guide. 2nd ed. Durham, NH: Ulrich/Process Publishing, 2004. ISBN: 0970876823.
Process Safety
Crowl, D. A., and J. F. Louvar. Chemical Process Safety: Fundamentals with Applications. 2nd ed. Upper Saddle River, NJ: Prentice Hall PTR, 2002. ISBN: 0130181765.
Kletz, T. A. What Went Wrong?: Case Studies of Process Plant Disasters. 4th ed. Houston, TX: Gulf Professional Publishing, 1998. ISBN: 0884159205.
Process Technology Descriptions and Handbooks
Moulijn, J. A., M. Makkee, and A. van Diepen. Chemical Process Technology. New York, NY: John Wiley and Sons, Ltd., 2001. ISBN: 0471630098.
Othmer, D. F., and Raymond E. Kirk. Kirk-Othmer Encyclopedia of Chemical Technology. 27 vols. 5th ed. Chichester, UK: John Wiley and Sons, 2004. ISBN: 0471488100.
Perry, R. H., D. W. Green, and J. O. Maloney. Perry's Chemical Engineers' Handbook. 7th ed. New York, NY: McGraw-Hill, 1997. ISBN: 0070498415.
Bohnet, M., et al. Ullmann's Encyclopedia of Industrial Chemistry (http://www3.interscience.wiley.com/cgi-bin/mrwhome/104554801/HOME). 7th ed. New York, NY: John Wiley and Sons, Inc., 2006. ISBN: 3527313184. (Software ed.)
Ullmann, F., W. Gerhartz, Y. S. Yamamoto, F. T. Campbell, R. Pfefferkorn, and J. F. Rounsaville. Ullmann's Encyclopedia of Industrial Chemistry. 5th ed. Deerfield Beach, FL: VCH, 1985. ISBN: 0895731517.
Problem Solving Strategies
Fogler, H. S., and S. E. LeBlanc. Strategies for Creative Problem Solving. Upper Saddle River, NJ: PTR Prentice-Hall, 1995. ISBN: 0131793187.
باشگاه مهندسان ایران
vBulletin® v4.2.5, Copyright ©2000-2025, Jelsoft Enterprises Ltd.